Hello I have a a 1968 international Harvester pickup truck I want to go disc brakes iv been calling around and people are telling me it’s impossible to get parts i am doing a street machine so i don’t mind using other style kits.so my question is what kind of disc brake kit can I use that will fit
Good day to all.
I have what appears to be a challenge for anyone who wants to help.
I have acquired a 1978 IHC 5070 series Paystar 6 wheel drive.
I am experiencing a bit of difficulty in locating information about it.
I know it was built in Tampa, Florida.
I have the frame serial number,but no tags on the truck itself.
As far as I can determine it is all original.
I have had no luck working with Navistar at this point,(probably a covid19 thing).
I am looking for any information, books, parts etc.
I am making a motorhome out of the cab and chassis.
Thank you to anyone who takes the time to help.
You like German IH tractors. I like the those tractors too. I have a 523, 624 and 724. For me 624 I look for a 624 grill.
I am looking foe a aluminium export Grill. those grill’s are sold in Canada.. I have a sales picture from IHC Canada but I can’t paste it in this form.
Arie do you known where I can buy one? You efforts are very much appreciated.
Hi Dirk that alumnium grill was only sold with 724 and 824 tractors i believe after 71 until 75 never sold with a 523 or 624 at the time when they went from plastic to alumnium the 523 became 553 and 624 became 654 however you can make it fit with miner modifications i can probably find one here and send it to you
Hi Dirk we brought a 323 when we moved from Bergambacht Zuid Holland to Ontario and here i found over the last 20 years a 844 S ,644 E narrow ,633 2WD ,633 4WD,624,724,824 ,1246,B414,Farmall m,Farmall c ,W4 AND ,MC 1020 .The 644 E is very rare there is only a couple of them made in France ,this one worked in Florida USA ,we bought it a few years ago in Sault St Mary ,so some times your supprised what can find .
It is the 100th Anniversary of the Vancouver International Auto Show and we are celebrating by showing a number of significant vehicles from the last 100 years. One of our special displays is the evelution of the pick up truck and one of the vehicles we would like to have in that display is a 1957 IH Crew Cab. Do you know if you have a BC member who has that vehicle and could you put him in touch with me to see if we can get it in the show. Thank you for your cooperation. Phil Heard [email protected]
I am looking for some historical information regarding your club as it pertains to photo that I recently came across.
The photo is of the 1910 International Harvester Co Football Champions. The photo was mounted by I. King (photography) on 181 King Street E Hamilton for Mrs Neville, who is likely related to the player identified in the photo as J. Neville.
I am looking for a 6 volt battery that will actuall fit a 1946 Farmall A battery box. Most of the ones I have found are too high by about 1/2 inch. Any suggestions appreciated.
Great IHC Side!
I´m very interested on the IHC-Company and at the tractors. On my little farm, I work with an IHC McCormic D214, but I see in Canada there give more machines than in Germany. Beautiful!
I’m looking for a 1962 C-130 or Travelette truck to purchase
Thank you in advance for any help
My # 647-281-2129
I was wondering if you could give me some help in finding information and the value of a tractor I have. It is partially restored. It is an International M. It is an Industrial type tractor. It has yellow paint. Also, a rounded removable cab. It has the FBK prefix to the serial number.
I’m restoring my grandfathers Farmall M.
It has FBK prefix as well but it isn’t an industrial tractor.
Can you post some pictures?
Hi guys on the hunt for a 66 series tractor is that something that one of your members could help me with thanks Brad
Brad – I suggest calling Home Of Spare Parts – Brian Cook. try looking him up on Google. Stratford, ON
Hello I have a a 1968 international Harvester pickup truck I want to go disc brakes iv been calling around and people are telling me it’s impossible to get parts i am doing a street machine so i don’t mind using other style kits.so my question is what kind of disc brake kit can I use that will fit
Good day to all.
I have what appears to be a challenge for anyone who wants to help.
I have acquired a 1978 IHC 5070 series Paystar 6 wheel drive.
I am experiencing a bit of difficulty in locating information about it.
I know it was built in Tampa, Florida.
I have the frame serial number,but no tags on the truck itself.
As far as I can determine it is all original.
I have had no luck working with Navistar at this point,(probably a covid19 thing).
I am looking for any information, books, parts etc.
I am making a motorhome out of the cab and chassis.
Thank you to anyone who takes the time to help.
Hello there we live in CANADA for about 20 years and collected a bunch German build IH tractors from the late 60,s
and early 70,s we realy like them
Hallo Arie,
You like German IH tractors. I like the those tractors too. I have a 523, 624 and 724. For me 624 I look for a 624 grill.
I am looking foe a aluminium export Grill. those grill’s are sold in Canada.. I have a sales picture from IHC Canada but I can’t paste it in this form.
Arie do you known where I can buy one? You efforts are very much appreciated.
Best regards,
Dirk Piek from Holland.
Hi Dirk there is wrecker here in st Marys Ont there name is Fawcett Tractor Supply that is where i found some of my tractors and parts
Hi Dirk that alumnium grill was only sold with 724 and 824 tractors i believe after 71 until 75 never sold with a 523 or 624 at the time when they went from plastic to alumnium the 523 became 553 and 624 became 654 however you can make it fit with miner modifications i can probably find one here and send it to you
Hello Arie,
which types of tractors have You?
Hi Dirk we brought a 323 when we moved from Bergambacht Zuid Holland to Ontario and here i found over the last 20 years a 844 S ,644 E narrow ,633 2WD ,633 4WD,624,724,824 ,1246,B414,Farmall m,Farmall c ,W4 AND ,MC 1020 .The 644 E is very rare there is only a couple of them made in France ,this one worked in Florida USA ,we bought it a few years ago in Sault St Mary ,so some times your supprised what can find .
Hi Arie,
You have a nice collection! I was asking are your Familly come from Holland? because Arie is an Dutch name>
It is the 100th Anniversary of the Vancouver International Auto Show and we are celebrating by showing a number of significant vehicles from the last 100 years. One of our special displays is the evelution of the pick up truck and one of the vehicles we would like to have in that display is a 1957 IH Crew Cab. Do you know if you have a BC member who has that vehicle and could you put him in touch with me to see if we can get it in the show. Thank you for your cooperation. Phil Heard [email protected]
I am looking for some historical information regarding your club as it pertains to photo that I recently came across.
The photo is of the 1910 International Harvester Co Football Champions. The photo was mounted by I. King (photography) on 181 King Street E Hamilton for Mrs Neville, who is likely related to the player identified in the photo as J. Neville.
Any information you can provide would be helpful.
I can also send you some photos of the item
I am looking for a 6 volt battery that will actuall fit a 1946 Farmall A battery box. Most of the ones I have found are too high by about 1/2 inch. Any suggestions appreciated.
Great IHC Side!
I´m very interested on the IHC-Company and at the tractors. On my little farm, I work with an IHC McCormic D214, but I see in Canada there give more machines than in Germany. Beautiful!
Great wishes from Bavaria,
Michael
I’m looking for a 1962 C-130 or Travelette truck to purchase
Thank you in advance for any help
My # 647-281-2129
I was wondering if you could give me some help in finding information and the value of a tractor I have. It is partially restored. It is an International M. It is an Industrial type tractor. It has yellow paint. Also, a rounded removable cab. It has the FBK prefix to the serial number.
I’m restoring my grandfathers Farmall M.
It has FBK prefix as well but it isn’t an industrial tractor.
Can you post some pictures?